|
| CL100 |
 Bottle Brush - A good nylon brush for beer
and wine bottles. |
| CL105 |
 Carboy Brush - Specially made for carboys,
bent to reach all parts. |
| CL106 |
 Demi John Brush |
| CL107 |
Tank Brush - 38" sturdy brush, great for cleaning kegs or other wide mouth containers. |
| CL110 |
1/4" Tube Brush - 36"
long. Great for kegs, racking canes, and keg lines. |
| CL112 |
3/8" Tube Brush - 36"
long. Great for siphon tubing. |
| CL114 |
1" Tube Brush - 48"
long. Great for blow off tubing. |
| CL215 |
Faucet Adapter - Adapts kitchen faucet to
hose threads. |
| CL205 |
 Carboy & Bottle Washer -
Powerful blast of water to help clean or rinse. Attaches to a
faucet with hose threads (see Faucet Adapter - CL215 above). |
| CL208 |
 Double Blast Bottle Washer
- Press down to rinse, lift to stop. Wide stable base, quick disconnect from faucet, eliminates stress on
faucets and pipes. Includes custom nozzle for carboys. |
| CL230 |
Vinator - Bottle Rinser / Sulphiter.
Mounts on the top of 90 seat bottle tree (CL225 sold below) and pumps a stream of water or
sanitizer up into a bottle when depressed. Liquid collects back in
the basin to be recirculated again and again. |
| CL210 |
 Power Wash Spray Wand - Plastic wand blasts water from the tip in all directions.
Comes with 4 ft. of flexible hose and attaches to your faucet with hose thread (see Faucet Adapter - CL215 above). Great for cleaning carboys and bottles.
|
| CL400 |
 Wash Bottle - 500 ml. Controlled applications of sanitizer with just a little squeeze.
Works great with Star San for those small cleaning jobs.
|
| CL220 |
Bottle Tree - These are handy racks for draining and storing beer bottles
upside-down.
- Small holds 45 bottles
- Large holds 90 bottles.
|
| CL225 |
| KG408 |
 Beer Gun Bottle Filler - Make bottling fun with this handy new gadget featuring one handed
operation. Stainless steel construction on everything that touches your beer or wine,
works great for kegs or bottling buckets. Comes standard with 10 ft of 3/16" ID hose and a brush
for cleaning the inside of the tubes.
(To use with a keg, see KG409 Connector Kit.) |
| BE220 |
Plastic Bottle Filler - Attaches to end of
3/8" siphon tubing, has a springless valve for filling bottles without
spilling |
| BE275 |
Plastic Spigot - Includes nut and 2 washers. Drill a 1"
hole to install in plastic fermenter. |
| BE270 |
Bottling Bucket - 6.5
gallon bucket with a
plastic spigot. Essential for creating an easy, gravity fed bottling system. |
| BE230 |
 Automatic Bottle Filler - Slick new
gadget, simply attach siphon hose to the spigot on your bottling bucket
and push the button; automatically stops when the beer bottle is full.
Accommodates 5/16", 3/8" and 1/2" siphon hoses, features adjustable fill
level and flow speed, includes anti-foam attachment. |
| CC405 |
 Two-Handle Capper - A sturdy capper that
will do the job. The two-handled capper is the capper in our basic
Brewing Equipment Kits. If you are going to do a lot of bottling, you
will want a bench capper - but for the price, the Two-Handle Bottle
Capper works very well on American-design standard beer bottles. |
| CC410 |
 Bench Capper - This is a good Bench
Capper, made of high-impact plastic and plated steel. This capper will
work on all recappable bottles, including champagne bottles. |
| CC530 |
Colonna Corker/Capper - Interchangeable heads allow you to cork and cap all with this one sturdy piece of equipment. Gear driven
head has lots of power, comes with two capper housings for domestic crowns and the larger European crowns |
| CC133 |
29mm Bell - Simply screws into place and replaces the standard
26mm bell. Works with both the CC405 two handle capper and CC410 bench
capper shown above. |
|
Bottling Equipment
Home
Bottle Brush - A good nylon brush for beer
and wine bottles.
Power Wash Spray Wand - Plastic wand blasts water from the tip in all directions.
Comes with 4 ft. of flexible hose and attaches to your faucet with hose thread (see Faucet Adapter - CL215 above). Great for cleaning carboys and bottles.
Bottle Tree - These are handy racks for draining and storing beer bottles
upside-down.
Beer Gun Bottle Filler - Make bottling fun with this handy new gadget featuring one handed
operation. Stainless steel construction on everything that touches your beer or wine,
works great for kegs or bottling buckets. Comes standard with 10 ft of 3/16" ID hose and a brush
for cleaning the inside of the tubes. 
Automatic Bottle Filler - Slick new
gadget, simply attach siphon hose to the spigot on your bottling bucket
and push the button; automatically stops when the beer bottle is full.
Accommodates 5/16", 3/8" and 1/2" siphon hoses, features adjustable fill
level and flow speed, includes anti-foam attachment.
Two-Handle Capper - A sturdy capper that
will do the job. The two-handled capper is the capper in our basic
Brewing Equipment Kits. If you are going to do a lot of bottling, you
will want a bench capper - but for the price, the Two-Handle Bottle
Capper works very well on American-design standard beer bottles. 
Bench Capper - This is a good Bench
Capper, made of high-impact plastic and plated steel. This capper will
work on all recappable bottles, including champagne bottles.
Colonna Corker/Capper - Interchangeable heads allow you to cork and cap all with this one sturdy piece of equipment. Gear driven
head has lots of power, comes with two capper housings for domestic crowns and the larger European crowns