 |
 Home Table of Contents Order a Catalog About Us
|
 |
 |
||||||||||||
| |||||||||||||||
Siphoning Equipment Siphoning Equipment for 3/8 inch tubing | |||||
| Cat # | Description | Size/Price | Qty | Buy | |
| BE300 |
 Racking Tube Clamp - Holds Racking Tube in
place |
||||
| BE100 | 3/8 in. Siphon Tubing - 3/8" inside diameter. | ||||
| BE212 | Stainless Steel Racking Tube - 24" cane with the same external dimension as the common plastic cane but a 50% larger internal dimension for a faster, smoother flow. | ||||
| BE213 | Stainless Steel Racking Screen - 4" long stainless steel mesh with welded bottom can be applied to any of our 3/8" OD racking canes. Handles deep traub and sediment. | ||||
| BE200 | Racking Tube - 24" curved top. | ||||
| BE205 | Racking Tube - 30" curved top. | ||||
| BE215 |
 Auto
Siphon - Siphon starter. This is
the best! One stroke of the hand and you have a siphon going in as
little as an inch of fluid. |
||||
| BE302 |
 AutoSiphon Clamp - Same as racking tub clamps but sized for the autosiphon. |
||||
| BE275 | Plastic Spigot - Drill a 1" hole to install in plastic fermenter. | ||||
| BE305 | Small Tubing Clamp - for 3/8" tubing. |
 |
|||
| BE310 | Large Tubing Clamp - for 3/8" tubing. | ||||
| BE315 |
 In-Line Valve -
For 3/8 in” flexible tubing. |
||||
Siphoning Equipment for 1/2 inch tubing | ||||
| Cat # | Description | Size/Price | Qty | Buy |
| BE216 |
Fast Flow Auto
Siphon - 1/2 inch Siphon starter. |
|||
| BE303 |
1/2 in. AutoSiphon Clamp - Same as racking tub clamps but sized for the autosiphon. |
|||
| BE210 | 1/2 in. Racking Tube - 30” length, curved top. Larger diameter for faster flow. | |||
| BE105 | 1/2 in. Siphon Tubing - fits 1/2 in. equipment. | |||
| BE301 |
1/2 in. Racking Tube Clamp - Holds Racking Tube in
place |
|||
Pumps | ||||
| Cat # | Description | Size/Price | Qty | Buy |
| BE400 | Transfer Pump - Self Priming Automatic Shut-off Thermally Protected Motor Adjustable Flow Rate .8-3.0 gallons per minute Can run continuously for 90 minutes On/Off Switch Includes: 40 mesh pre-filter 2 x 3 ft flex tubing Note: Maximum liquid temp 110 deg F (43 C) |
|||
| BE405 | High Temperature Transfer Pump - This pump includes a bracket so that it can be mounted and a 6' power cord with plug wired in for easy use. It also features a continuous-duty 1/25 hp 1.4 Amp motor with a maximum flow of 7.2 gpm with a maximum head of 12 feet. 1/2" mpt fittings on both inlet and outlet. Polysulfone, pump head and 316 stainless steel, silicon rubber, Ryton and Teflon contact parts. Face unscrews and rotates at 90 degree intervals to adjust to your application. Magnetic drive, not self priming. | |||
| Home Table of Contents Ordering Information |
|
205 West Bain, P.O. Box 730, Ozark, MO 65721
Voice (800) 321-2739, Fax (417) 485-4107 Email: brewery@homebrewery.com Š Copyright 2000-2006, The Home Brewery, Inc |